Sinoarcade
Screw Button Wrench for Gamerfinger HBFS-24 HBFS-30 Screw Buttons Booster Wrench for Sanwa Denshi Threaded Buttons
Screw Button Wrench for Gamerfinger HBFS-24 HBFS-30 Screw Buttons Booster Wrench for Sanwa Denshi Threaded Buttons
Couldn't load pickup availability
Sinoarcade Screw Button Wrench for Gamerfinger HBFS-24 HBFS-30 Screw Buttons Booster Wrench for Sanwa Denshi Threaded Buttons
It is very common that removing and putting thread buttons is tedious because of the design of the thread and the separation between buttons, in the market there are similar solutions but that force the consumer to buy 2 versions or more of this same key. We use both sides to take care of your economy.
SOLVING 24mm and 30mm buttons just WITH one TWIST
A screwbutton's main characteristic is its plastic nut, which when twisted clockwise, rises upward towards the button rim. Optimally, you will twist the nut as far as it can go until it cannot twist any more. This ensures a tight, wiggle free contact between the button and the wood or metal panel it is install onto.
Often this is done manually, using your fingers to rotate the nut until it secures to the wood or metal control panel. However, some button layouts do not make this physically possible, as the gaps between buttons do not accomodate one's fingers after a certain height. Players are left with buttons slightly loose, or give up installing them.
Our wrench aims to close that gap with a 3D printed wrench. At the top is a large hexagonal shape that accomodate your fingers. The bottom mimics each popular brand's screwbutton nut shape, while having a minimal thickness to fit in most gaps. Twisting slightly to line up the bottom with the screw but, then pressing down grips the nut. You can now twist the nut into place.
Supports
Gamerfinger HBFS-30 Screw (30mm)
Gamerfinger HBFS-24 Screw (24mm)
How is the Wrench used?
Use the large side for 30mm buttons or the small side for 24mm buttons
Align the thread and Booster so you can hold (check that the button thread is not upside down)
Turn the side opposite the hands of the clock if you want to remove the thread from the button or the other way around if you put more pressure.
*A thread button is very worthwhile considering that it does not have legs on its sides which are damaged like buttons with pressure installation system.
This Listing Incdlue:
One pcs Sinoarcade Screw Button Wrench
We care for your order
