Sinoarcade Hitbox Clear Plexi Cover and Metal Plate Conversion Kit with Cable For QANBA Obsidian Pearl Fight Stick DIY to Hitbox

Feature:

The Hitbox conversion set for QANBA Obsidian and Qanba Pearl is ideal for those customers who want to convert their QANBA Obsidian or Pearl fight stick into a Hitbox.

Each conversion kit includes a pre-drilled plexi sheet and a pre-drilled metal plate.

These feature 11 x 24mm diameter button holes and 1 x 30mm button hole.

The version of Obsidian in Hitbox became popular since tokido began to use it.

Installation

Step 1: Remove the joystick and buttons
Step 2: Remove the current Plexi Cover and metal plate
Step 3: Keep in mind that for the correct operation of the 30mm button requires
Step 4: breaking a little
Step 5: Install the Metal Plate converter
Step 6: Take the Plexi Cover and remove the protective film from both sides and proceed to install
Step 7: Install the buttons
Step 8: Connect the hitbox Conversion Harness in the lever section

Compatible Buttons:

You will require 11 x 24mm buttons and 1 x 30mm button for the Hitbox conversion

What's Included:

1 x Plexi sheet (pre-drilled with 11 x 24mm holes and 1 x 30mm hole)
1 x Metal plate (pre-drilled with 11 x 24mm holes and 1 x 30mm hole)
1 x Hitbox Conversion Harness
1 x Artwork paper （You also can use your own artwork design, we can offer the template for you)

*Each plexiglass have a anti-scratch film to cover. Please remove the film before using. Thanks
* Qanba Obsidian or Pearl Fightstick NOT INCLUDE for this listing

 

Kit 01 Example

Kit 01 with artwork after install in the Qanba Obsidian Fightstick

Kit 02 Example

Kit 02 with artwork after install in the Qanba Obsidian Fightstick

We care your order